Publicité
1 | General information
2
Fig. 39: Laying the cable and attaching the
capacitor
60
EN
9) Lay the cable in the stove as shown and fix to points 1
1
+ 2 with a cable tie.
10) As an option a cable clip may be attached at the point
shown by the arrow. Remove this cable clip. There
may only be a small hole there.
11) Rebore this hole so that the capacitor can be attached
here.
12) Connect cable to the capacitor.
ð When doing so it is not important which cable is
connected to which connection.
13) Attach the capacitor at this point.
Luftverteilermodul montieren
Publicité
