Publicité
Luftverteilermodul montieren
Fig. 11: Connecting the cable to the capa-
citor
Fig. 12: Clipping on to the air distribution
module
EN
14) Connect to the capacitor.
ð When doing so it is not important which cable is
connected to which connection.
15) Fasten capacitor to stove. See next picture.
16) Clip air distribution cable on to the control unit.
ð There are two cables (grey and brown) to be
plugged in. It does not matter which cable is con-
nected to which connection.
ð Connection to position 5+6.
1 | General information
49
Publicité
