Publicité
Maintenance
Replacing the stainless steel wire (to cut clay)
If the stainless steel wire is broken, replace it as
follows:
① Remove the broken stainless steel wire.
② Secure the wire to point A.
③ S lightly bend the cutter in direction B and
then secure the wire to point C.
• Purchase a commercially available
stainless steel wire (piano wire) Φ1.2mm.
Disposal method
• Contact your local government as the disposal method differs depending on local governments.
• Do not disassemble the NVS-07 when disposing of it.
15
Extruding slot
A
Cutter
English
Stainless steel wire
B
C
Publicité
