Publicité
ENGLISH
TO USE YOUR WATER DISPENSER
Insert the water purifier vertically into the water guard and press the taps until the water flows out from the RED(hot)tap.
A. Hot water
Insert plug into the socket and turn on the hot power switch (brown one, on the back of appliances) , then the hot
l
indicator lights up to show the water is heating.
l
When hot indicator lights off and normal lights up, means heating finished.
l
Put your cup under the hot water tap, press the tap for hot water now.
l
Note: The water is hot, to avoid any scald, please do not allow children to press the hot water tap and do not put
your hand under the hot water tap.
B. Cold water
l
Insert plug and turn on the cold power switch (green one, on the back of appliances) , then the cold indicator lights
up.
l
When you first time using cold water, put your cup under the cold water tap and wait for 3-5mins. Then press cold
water tap for the cold water now.
CARE AND CLEANING
Unplug your Water Dispenser and let it cool down before cleaning. Never immerse the water dispenser into water.
1.
Put down your water purifier or water container onto the water dispenser.
2.
Rotate right the water guard and take out, put it under water for cleaning.
3.
Wipe the water guard with a damp cloth.
4.
Put water guard onto the appliance and rotate left for install.
5.
Wipe the water dispenser outside with a damp cloth.
6.
Take off the drip tray and wash it with water.
7.
Use clean damp cloth to wipe the fridge and do not damage the fridge.
Note:
Do not use abrasives· they will scratch the plastic surfaces
Do not use scouring powder, or any other cleaning products as they may discolor your water dispenser.
MALFUNCTIONS PHENOMENAS AND ELIMINATION MEANS
(Note: When repair, don't forget shut off power supply.)
Malfunctions
Lamp no light
1. Power supply isn't connected
2. This function switch isn't open
Leaking
1. Water purifier is broken
2.Silica gel pipe' s transfiguration & aging
3.Tap is damaged
No heating
1.Heating switch is damaged or contact isn't ok
2.Heating tank is burnt
3.Electric connection is loose
No cooling
1.Cooling switch is damaged or contact
isn't ok
2.Cooling line connection is loose
All manuals and user guides at all-guides.com
Possible reasons
Elimination means
1. Make sure the switch is "on" and the
plug is in the socket
2. Place the function switch on "open" location or turn the timer
1.Replace water purifier
2.Replace silica gel pipe
3.Replace tap
1.Replace switch, check connections
2.Replace heating tank
3.Repair connections
1.Replace switch, check connections
2.Repair connections
5
Publicité
