Publicité
Country of Use
Appliance Catagories
Allowable gasses
Gas Pressure
Ø110 burner jet no.
Ø110 burner nominal
usuage
Ø110 burner gross
nominal heat input
Ø75 burner jet no.
Ø75 burner nominal
usuage
Ø75 burner gross nomi-
nal heat input
AE = United Arab Emirates
CZ = Czech Republic
FR = France
JP = Japan
PT = Portugal
SK = Slovakia
3. Assembly Instructions
PLEASE NOTE: Please ensure all protective packaging and plastic are removed from the appliance before use.
This appliance may only be used with an approved hose and regulator.
The hose length should be no less than 600 mm and shall not exceed 1.2 m and replace when the hose is damaged or shows signs of brittleness
or cracks.
Do not twist or pinch the hose. Ensure that it is routed away from the stove body so as to prevent deterioration / damage to the hose
caused by heat.
Ensure that the appliance valves are in the off position by turning the knobs fully clockwise to the stop.
Open the gas valve on the cylinder and test for any leaks.
Check all gas connections for any signs of gas leaks.
Your appliance is now ready to be used.
I 3B/P (30), I 3+ (28-30/37) and I 3B/P (37), Appliance categories: (DK, FI, NO, NL, SE, AT, DE, BE, ES, FR, IE, IT, PT, GB, CH)
Push an approved hose onto the valve tailpiece until it is properly seated. On the other end, attach a suitable low pressure regulator.
I3B/P(30) : 30mbar Butane configurations regulator or 30mbar Propane configurations regulator.
I3B/P(37) : 37mbar Butane configurations regulator or 37mbar Propane configurations regulator.
I3+(28-30/37) : 30mbar Butane configurations regulator or 37mbar Propane configurations regulator.
Again making sure that the hose is properly seated. The type of hose used shall comply with the relevant EN standard and locate
requirement. In South Africa the regulator used must comply with SANS 1237.
I 3B/P (50) Appliance category: (AT, DE)
I3B/P(50) : 50mbar Butane configurations regulator or 50mbar Propane configurations regulator or 50mbar butane/propane mixture
configurations regulator.
Screw a hose with the correct threaded fittings on each end, onto the left hand 1/4" BSP thread of the valve. Attache a suitable 50mbar
low-pressure regulator on the end of the hose. The hose assembly used must comply with DIN 4815 part 2 or equivalent.
503-0637 LEV4 (400) Mighty 4 Stove - User Manual (EU & SA).indd 2
All manuals and user guides at all-guides.com
Model: 400
BE, CH, CY, CZ, ES, FR,
GB, GR, IE, IT, LT, LU, LV,
PT, SK & SI
I
3+(28-30/37)
Butane
Propane
28-30mbar
37mbar
86
Butane - 240g/h per
Butane - 268g/h per
burner
(240g/h x 2 = 480g/h
(268g/h x 2 = 536g/h
in total)
3.3kW per burner
3.6kW per burner
(3.3kW x 2 = 6.6kW in
(3.6kW x 2 = 7.2kW
total)
72
Butane - 168g/h per
Butane - 187g/h per
burner
(168g/h x 2 = 336g/h
(187g/h x 2 = 374g/h
in total)
2.3kW per burner
2.6kW per burner
(2.3kW x 2 = 4.6kW in
(2.6kW x 2 = 5.2kW
total)
Country Name and Abbreviations
AL = Albania
AT = Austria
DE = Germany
DK = Denmark
GB = United Kingdom
GR = Greece
KR = Korea
NL = Netherlands
RO = Romania
RU = Russia
SE = Sweden
TR = Turkey
BE, CY, DK, EE, FR, FI,
HU, IT, LT, NL, NO, SE,
PL
SI, SK, RO, HR, TR, BG,
IS,LU, MT
,
I
I
3B/P (37)
3B/P (30)
Butane, Propane or their mixture
37mbar
28-30mbar
86
86
Butane - 240g/h per
burner
burner
(240g/h x 2 = 480g/h
in total)
in total)
3.3kW per burner
(3.3kW x 2 = 6.6kW
in total)
in total)
72
72
Butane - 168g/h per
burner
burner
(168g/h x 2 = 336g/h
in total)
in total)
2.3kW per burner
(2.3kW x 2 = 4.6kW
in total)
in total)
BE = Belgium
ES = Spain
HR = Croatia
NO = Norway
RS = Serbia
ZA = South Africa
2 2
GB
AT, CH, DE & SK
& ZA
I
3B/P (50)
50mbar
75
Butane - 240g/h per
burner
(240g/h x 2 =
480g/h in total)
3.3kW per burner
(3.3kW x 2 = 6.6kW
in total)
63
Butane - 168g/h per
burner
(168g/h x 2 =
336g/h in total)
2.3kW per burner
(2.3kW x 2 = 4.6kW
in total)
CH = Switzerland
FI = Finland
IT = Italy
PL = Poland
SI = Slovenia
14/12/2017 09:56:31
Publicité
