Publicité
ENGLISH
ELECTRONIC SPEED CONTROL
- You can control the speed of the
device by simply operating the speed
selector control (I). This function is
very useful since it allows you to adapt
the speed of the device to the type of
work that needs to be done.
ONCE USE OF THE DEVICE IS
FINISHED:
- Stop the appliance by selecting the
OFF position of the selector knob.
- Unplug the device from the electrical
network.
- Uncouple the jug from the motor
body.
- Clean the device as indicated in the
"Cleaning" section.
SMOOTHIES FUNCTION
- This function is designed to make
smoothies, creams, purees,
gazpacho...
- IMPORTANT: never work with boiling
liquids or ingredients whose
temperature exceeds 80oC.
- With the selector control in the ON
position, press the button (L) to
activate. The button (L) will remain
illuminated.
- To stop the function, press the
button (L) again.
PULSE FUNCTION
- With this function the device
operates at maximum speed to
achieve optimal performance.
- With the selector knob in the ON
position, press the button (J). The
Pulse button will light.
- This function is only activated when
you keep pressing the button, if you
stop pressing the device will stop.
- It is recommended to work by
pressing the button in cycles of 3
seconds and repeat the operation
until you obtain the desired result.
ICE CRUSH FUNCTION
- This function provides optimal
results for crushing ice to the desired
level.
- Do not add more than 12 20x20x20
mm ice cubes.
- With the selector control in the ON
position, press the button (K) to
activate the function. The button (K)
will light.
- When activating this function, the
device will automatically activate for 1
second, stop and activate again. So on
until 39 seconds or deactivate the
function manually.
IMPORTANT:
If the jar is picked up during any use,
the blender will stop working. If you
want to restart, first turn the speed
selector knob to "OFF" and then select
the desired mode.
Cleaning
- Unplug the appliance from the mains
and let it cool before starting any
cleaning operation.
- Clean the device with a damp cloth
soaked in a few drops of detergent
and then dry it.
- Do not use solvents, or products
with an acidic or basic pH factor such
as bleach, or abrasive products to
clean the device.
- Do not allow water or other liquid to
enter through the ventilation
openings to avoid damage to the
internal operating parts of the
appliance.
- Do not submerge the device in water
or other liquid, or put it under the tap.
- During the cleaning process you
must be especially careful with the
blades as they are very sharp.
- If the appliance is not kept in a good
state of cleanliness, its surface may
degrade and inexorably affect the life
of the appliance and lead to a
dangerous situation.
EN
Publicité
