Publicité
Slip the bolts (J) into the spacers (K) and then through the through holes on
each side of the table plate, slip the spacers (K) on the other side and secure
Step 7
with the jam nuts (L) and install as shown.
NOTE: Tighten all bolts on the table top.
J×8
Rotate the lower side por�on of the umbrella cover(O) down and cut it in half.
Step 8
Place the upper side threaded part from the top of the table top, and the lower
part from the bo�om of the table top back into the top part of the umbrella
cover and rotate to secure.
O×1
K×16
11
J
Tools:
L×8
O
K
L
P
Q
Publicité
