Publicité
Remove and transmitter of the AC150 memory
First, press and hold the (●) button for 3 seconds to enter
the pairing mode.
Press the (●) button to move to the zone which is to be
deleted.
Press and hold the(●) and ( ) buttons together for 3 seconds
The receiver will generate a tone to indicate the transmitter of
this zone has been deleted.
CHANGE THE MELODY IN DESIERD ZONE
First, press and hold the (●) button for 3 seconds to enter
the pairing mode.
Press the (●) button to move to the zone then press the ( )
button to select the melody required.
Press the (●) button until the pairing mode is exited.
USING
When the AC150 receives a trigger signal, it will play a melody
and vibrating (depend on the Alarm setting position). The zone
LED will light to show which sensor is triggered. The Zone LED
will keep lighting until the reset button is pressed..
GUARANTEE
From the moment your Geemarc AMPLICALL
Geemarc guarantee is for the period of two years. During this
time, all repairs or replacements (at our discretion) are free of
charge. Should you experience a problem then contact our help
line or visit our website at www.geemarc.com. The guarantee
does not cover accidents, negligence or breakages to any parts.
The product must not be tampered with or taken apart by anyone
who is not an authorized Geemarc representative. The Geemarc
guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE
AND MUST BE RETAINED AND PRODUCED IN THE EVENT
OF A WARRANTY CLAIM.
6
TM
150 is purchased,
Publicité
