Cleaning And Maintenance; Technical Data - HAEGER Zammy SM-75G.004A Mode D'emploi

Switching Off
If you would like to interrupt operation or switch the device off, remove the plug
from the socket. The red control lamp goes off.

Cleaning and Maintenance

WARNING:
– Always pull out the plug from the mains socket before cleaning and wait
until the unit has cooled down.
– Do not immerse the device in water! It could result in an electric shock or
fire.
CAUTION:
– Do not use any wire brush or other abrasive objects.
– Do not use any acidic or abrasive detergents.
Baking Surfaces
 Remove any food residues while they are still warm with a damp cloth or
paper towel.
 Wash off the baking surfaces with a soft sponge and soapy water; then wipe
with clean water and dry thoroughly with a soft cloth. After drying please
apply a thin film of edible oil to the surface.
Housing
 Clean the housing after use with a slightly damp cloth.

Technical Data

Model: .............................. SM-75G.004A / SM-75T.005A / SM-75M.006A
Power supply: ................... 220-240V~, 50-60 Hz
Power consumption: ....... 750W
Protection class: .............. Ι
Conformity
This device has been tested according to all relevant current CE
guidelines,
2004/108/CE, and has been constructed in accordance with the
latest safety regulations.
Instructions for use
such as electromagnetic
English
compatibility Directive
4