Publicité
DISHWASHER CONNECTION (IF REQUIRED)
If you are connecting to a dishwasher, complete the
following step. If a dishwasher is not to be connected,
1
KNOCK OUT PLUG
screwdriver or sharp instrument. When knockout
plug falls into disposer, you may remove it
or simply grind
up when the disposer
damage the disposer
in any way, but may
take some time to
grind, over the course
several uses.
ATTACH THE DISCHARGE ELBOW
ATTACH RUBBER GASKET
1
Slide rubber gasket over drain pipe.
Elbow
49-4000307 Rev 1
Installation Instructions
it
is
Knock out
plug
of
Rubber
Gasket
2
CONNECT HOSE
Connect the dishwasher hose using a hose
clamp. If the hose size is different, you will need a
stepped rubber adapter.
Hose Clamp
CONNECT DISCHARGE
2
ELBOW*
Slide bracket over discharge elbow and connect
to the disposer.** Make sure all plumbing
connections are tight.
Rubber
Gasket
Elbow
** Some installations (see page 11 for example) may
require the use of a flexible drain pipe.
Stepped Rubber Adapter
9
Publicité
