Publicité
PROCEDURE A
All manuals and user guides at all-guides.com
- For MY 2021 or more recent motorcycles;
- RX1PRO FW.CODE equal to or higher than RX1PRO14.
1.
caps and connect the
RESET TPS cable (included
in the box) to RX1 PRO ECU
"MAIN" connector.
2.
charged 12V battery to
"RESET TPS" cable: first,
red wire to positive pole
(+) and then black wire to
negative pole (-).
3.
completely forward to
make sure it is in closed
position
operation.
Press
engine stop button for 5
seconds or until the RX1
turns the fuel pump and
the
Indicator Lamp) light on
(when present).
By doing this operation,
the minimum TPS value
is saved.
Remove the protective
Connect
a
Twist the throttle
during
and
hold
MIL
(Malfunction
2
fully
this
the
9
1
5 sec.
EN
Publicité
