Publicité
1. General Information
During the initial start-up and use of this appliance, please observe the following points:
Establishing the power supply
Mounting to a wall bracket
Cleaning the appliance
Heat / Humidity
LED display
30
Connection is only possible to a 12V power supply, observe
correct polarity.
Ensure that the mounting screws are not too long. The screws
must not protrude into the appliance by more than 10 mm.
Prior to cleaning disconnect the power supply line.
Do not use detergents, do only clean with a soft humid cloth or
special detergents for flat screens.
The appliance should be exposed neither to extreme heat nor to
water and humidity, respectively.
The appliance can become damaged by pressure onto the screen
surface.
Publicité
