Rice/Water Measurements; Cleaning, Care & Maintenance - Buffalo J300 Mode D'emploi

UK
Carefully open the lid, allowing any steam and condensation to run back into the rice cooker.
11.
WARNING: Always take care to avoid the expulsion of steam when removing the lid.
Always use heat proof gloves when removing the inner bowl after cooking.
Stir the rice and serve as quickly as possible.
12.
Disconnect the appliance from the power supply.
13.

Rice/Water Measurements

As a general guide, use one full cup of water to each full cup of rice.
Add slightly more water for softer rice, or slightly less water for firmer rice.
Cleaning, Care & Maintenance
Note: Always switch off and disconnect the appliance from the power supply before
cleaning.
Always allow the appliance to cool before cleaning.
Remove the inner bowl and wash in warm, soapy water. Do not use harsh abrasive cleaners or
1.
products that are not recommended for use on non-stick coatings.
Rinse and dry thoroughly.
2.
Clean the exterior of the rice cooker with a damp cloth.
3.
Ensure the heating plate is clean and free of food or other debris that could interfere with the cooking
4.
process.
Dry the heating plate thoroughly before use.
5.
J300 Only
Remove the water collector from below the lid hinge by pulling
1.
outwards [Fig. 1]. Discard the water collected after each use.
Clean and replace the water collector.
2.
3
Fig. 1