AVENZO AV-TW5007 Manuel D'utilisation page 14

Accept or reject incoming calls with Bluetooth earphones
We can receive calls while using the Avenzo AV-TW5007 earphones. If we are listening to
music and someone calls us, the music will stop, and we will hear the ring tone.
To accept the call, press the MF button 1 on any of the earphones.
You can talk regularly, using the built-in microphone in the earphones.
To end the call, press the button 1 of any of the earphones.
To reject a call, double-click the button 1 on any of the headphones.
Playing Music
To start playback, press the button 1 once. If you press again, you will leave the music in
Pause.
You can move to the next song by double-click the button 1 the right earphone.
We can go back to the beginning of the current song or move to the previous song by
double-click the button 1 the left earphone.
Volume control
You can control the volume of the earphones independently of the volume of your
smartphone.
To increase the volume, press the left button 1 three times. When you reach the maximum,
you will hear a beep sound. To lower the volume, press the right button 1 three times.
Voice assistant
The Avenzo AV-TW5007 headphones have the Voice Assistant function. You can activate it
by pressing the multifunction button for 1 second and then releasing it. You will hear a
short sound, and then you will hear Voice Dial, after which you can give the order you want
to the microphone of your headphones. By activating the Voice Assistant, you can give
orders to your smartphone, manage music, request information, etc. Check the websites
of Google and Apple for more information.
This function is only available on compatible Android smartphones, and on Apple devices
with the Siri service available. Avenzo is not responsible for possible problems with the use
of this third-party service.
Turning the earphones on and off manually
You can turn the earphones on and off manually, without inserting or removing them
from the Power Bank.
To turn them on, press both buttons for 5 seconds. You will hear Power On. The LED light
will flash in blue and red. You must remove the fingers from the buttons now. The
earphones will pair with each other automatically, and synchronize with your smartphone,
if you already connected them at any moment.
To turn them off, press the button for 5 seconds on one of the earphones and both
earphones will turn off. You will hear Power Off.
Pairing in case of errors or disconnection
On occasion you may need to resynchronize the earphones between them if they are not
automatically paired when you remove them from the Power Bank.
To do this, turn off each one manually until you hear both Power Off.