Publicité
Installation
INSTALLING THE LEVELING FEET
- Remove the utility sink (D) and place it on a soft, protective
surface .
- Turn the cabinet (A) upside down onto the protective surface .
- Attach the leveling feet (C) to the base .
- Gently rotate the cabinet (A) right side up .
- Place a carpenter's level on top of the cabinet, then adjust each
leveling foot until the cabinet is level .
INSTALLING THE HANDLE
- Insert the door handle screws (AA) into the pre-drilled holes .
- Attach the handle (G) and tighten the handle screws (AA) .
QL103
All manuals and user guides at all-guides.com
6
CAUTION:
Do not rest or bump the leveling feet on the side
as this may cause them to detach or break .
C
G
AA
Publicité
