Publicité
EN
Before getting started
Make sure your phone or tablet
is connected to a 2.4GHz or
5GHz WiFi network. To install
this product you will need your
WiFi network name and WiFi
password. Make sure Bluetooth is
enabled on your phone or tablet
for easy installation.
1. Trust WiFi App
Download the Trust WiFi App
A
from the App store or Google
PlayStore.
Open the App. When using the
B
App for the first time you have
to register a new account.
2. Install the camera
Install
the
camera
connecting the supplied USB-C
cable to the supplied power
adapter. Then connect the USB-C
connector to the back of the
camera and the power adapter
to a power outlet. The camera
will now boot up. Wait untill the
camera plays a sound 2x and
rotates to indicate it has booted
up.
3. Connect the camera
Note:
Before
with this step make sure the
LED indicator on the front of the
camera is flashing. If the LED
is not flashing please reset the
camera.
Login to the Trust WiFi App and
press "Add device" or press the
(+) icon in the upper right corner.
Make sure you are close to the
camera and follow the onscreen
instructions.
4. Optional: Mount Camera
A
Remove
plate from the bottom of
the camera by rotating it
counterclockwise.
B
Secure the mounting plate
on a flat surface using the
supplied
screws. Place the camera back
on the mounting plate
5. Place SD Card
Manually move the camera
A
lens up or use the PTZ control
in the App. The SD card slot
becomes visible.
Insert the SD card in the
B
camera (Max. 256Gb) with
the copper connectors facing
by
first
upwards until you feel a click.
Reboot the camera for the SD
card to be detected.
Now your camera is ready to
use. For more usage information
go to trust.com/71364.
remove the camera from the
proceeding
App.
A
back of the camera for more
then 5 sec. The camera will beep
3x to indicate it is reset. After
resetting the camera will boot
up again.
the
wall
Reset Camera
Following this step will
Press the reset button on the
mounting
plugs
and
Publicité
