Publicité
CAU TION
If spray leaks during the process, realign the spray nozzle
with the refill port.
7.3 CHARGING THE DEVICE
As soon as LED 1 (4) flashes red every 5 seconds, the device must be
charged.
NOTICE
Only charge the device under supervision. Use the supplied
USB cable for charging.
1.
Open the flap on the USB
connector (9) and connect the
supplied USB cable to the device
(Fig. 2).
2.
Connect the cable to the PC or a
charging adapter.
During the charging process, the LED 1 (4) lights up red.
As soon as the charging process is completed, the LED 1 (4) will light
up green.
8
SETTINGS
You have the the option of adjusting the spray quantity and the
sensitivity of the sensor.
8.1 ADJUSTING THE SPRAYING QUANTITY
You can choose between a small and a large spray quantity. To change
the spraying quantity, briefly press the setting button (6) once.
Small spraying quantity: LED 2 (5) flashes yellow.
Large spraying quantity: LED 2 (5) flashes blue.
8.2 ADJUSTING SENSITIVITY
You can choose between low and high sensitivity. To change the
sensitivity, press and hold the setting button (6) for 3 seconds.
Low sensitivity: LEDs 1 and 2 (4 and 5) light up once simultaneously.
High sensitivity: LEDs 1 and 2 (4 and 5) light up twice simultaneously
20
INSTRUCTION MANUAL VOSS.PET AB2
Fig. 2
24548 - 08.2023 - V03
Publicité
