Publicité
4.5 - Select U1 and press SETUP.
Select
U1
4.6 - The display writes "Waiting MCU".
Waiting
MCU.
4.7 - Connect the DMX cable, then connect the power supply of the product. The product
starts in update mode and will not display the usual menu.
4.8 - Press SETUP, the software will update and the product will automatically restart at the
end.
Enter
4.9 - After the restart, reset the product in the "SETUP" / "Reset Default" menu.
User Manual - UBox 150
V1.2 11/2021
7/12
Publicité
