Publicité
Remote Control Features
ilectronic Display: Displays the following
lformation;
l Remote Control power On/Off and Mode Icons
!: Clock and Auto-Timer settings
): Current set temperature
): Fan speed setting
Control Buttons
. Power switch.
!. Mode
I. Fan Speed
L Energy Saver
i. Auto-Timer
i. Used to increase
A
or decrease
T
temperature
;ettings in 1° increments on the Celsius or
:ahrenheit scale. When adjust the timer or timer
;ettings in 1 minute
Cancels current Timer ON/OFF settings.
i.
Lock fil prevents the remote control settings from
nadvertently being changed.
). Clock: Depress the button for 3 seconds in order
o set the clock. Press the increase or decrease
irrow to adjust the clock in 1 minute intervals,
lolding down the increase or decrease arrow will
idjust the time in 10 minute intervals.
10. Used to activate the SLEEP program.
II. Toggle the LED backlight on/off.
12. Restore remote control default settings.
Batteries should be replaced when:
a) No signal (beep) is heard when attempting to
program the main unit.
b) The main unit does not respond to a command
issued by the remote control.
Battery replacement:
1. Slide the rear cover on the remote in the direction
of the arrow. Continue pulling (gently) until the
cover separates completely from the unit.
2. Insert (2) batteries (AAA) following the same
orientation (polarity) depicted inside the battery
chamber.(+/-)
3. Re-install rear cover.
4. If the remote control will not be used for extended
periods of time (vacations etc.), batteries should
be removed.
The remote operates within a range of 8 meters
(26 ft.) from the receiver located inside the main unit.
Any obstruction between the receiver and remote
may cause signal interference, limiting the ability to
program the main unit.
8
Publicité
