Télécharger Imprimer la page

Simplicity SAC8017EE Manuel D'utilisation page 8

Publicité

Key Pad Features
LED DISPLAY: Displays the following information
independently; Set Temperature, Ambient Room
Temperature and Auto Timer On/Off settings.
O POWER: Turns unit On / Off.
mode
MODE: Allows you to scroll through and select
V the desired operating mode; Cool 3%- , Dry ($ ,
Fan Only §§ and *Auto G59. The selected
mode will be denoted by the adjacent indicator
light. *'Auto' is a pre-set factory program that
automatically defines the mode (Cool or Dry) and
fan speed based on the set temperature.
FAN SPEED: Select from four different fan settings;
Low <&>, Medium §§, High ^ and Auto
during Cool and Fan Only mode.
Please note:
During Dry'mode the fan speed is automatically
defined.
q
ENERGY SAVER: Automatically cycles the fan on
\y- - and off while the compressor is not in use.
TEMP. /TIMER Control:
Used to increase ^ or
decrease
«f
the Temperature setting in 1°C / °F
increments.and Auto-Timer On/Off settings in 30
min./I hr. increments.
Temp/Timer
Control
Check
Filter
Mode
Selector
Energy
Saver
LEE
DISPLA'
Auto
Timer
Sleep
Mode
Fan
Speed
Power
Button
Note: This appliance allows you select the
temperature scale to be displayed in either "Celsius"
or Fahrenheit" according to your preference. To
change the temperature scale displayed on the
electronic display, press both the "Temp/Timer" adjust
arrows simultaneously to alternate between "Celsius"
& "Fahrenheit".
CHECK FILTER : The adjacent indicator light will
illuminate as a reminder to clean the air conditioner
filter (see page 9) Once the filter has been
cleaned and replaced, depress the Check Filter
button in order to resume operation.
SLEEP MODE : When activated, the current set
temperature is gradually increased over a one (1)
hour period then maintained for seven (7) hours.
Once the program is complete, the air conditioner
will resume to it's previous set temperature
(before sleep mode was activated). This feature
is meant to be used during the night time hours to
prevent the room from getting too cold (while you
sleep) and results in less compressor running time
and reduced energy consumption. Sleep mode
may be cancelled by depressing the Sleep Mode
button while the program is running.
0AUTO-TIMER:
Used to Initiate the Auto On and/or
Auto Off timer.
While the Air Conditioner is off (Auto-On):
1. Press the Auto-Timer button once and the adjacent
Auto-On indicator light'— ' will illuminate.
2. Use the Temp/Timer control cursors to select a
delayed On time of up to 24 hours.
3. Select the appropriate mode under which you want
the unit to operate (Auto-Cool-Dry-Fan Only)
4. Select the fan speed setting.
5. The time you selected will appear in the LED
display..
While the Air Conditioner is on (Auto-Off);
1. Press the Auto-Timer button twice and the adjacent
Auto-Off indicator light M will illuminate.
2. Use the Temp/Timer control cursors to select a
delayed Off time of up to 24 hours.
3. The time you selected will appear in the LED display
The Auto On and Auto Off timer can operate during the
same program by defining the Auto-Off parameters
immediately after the Auto On parameters.
The Auto-Timer may be cancelled at any time by turning
the unit On/Off.
7

Publicité

loading

Ce manuel est également adapté pour:

Sac12007ee