Télécharger Imprimer la page

Fortin THAR-ONE-TOY1 Instructions De Montage page 3

Publicité

This guide may change without notice. See www.fortin.ca for latest version.
Ce guide peut faire l'objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
KEY BYPASS PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ
1
x1
HOLD
2
HOLD
3
HOLD
4
RELEASE
5
INSERT
KEY
6
REMOVE
KEY
All manuals and user guides at all-guides.com
If the LED is not solid RED
RED
ON
disconnect the 6-Pin Main connector
ROUGE
and go back to step 1.
KEY IN
FLASH 10X
FLASH
10X
OFF
If the LED is solid RED disconnect
the 6-Pin Main connector and go
back to step 1.
Press and hold the
programming button.
Insert the connectors:
20 pin (White),
6 pin (Red),
5 pin (White),
2 pin (White).
(If required)
Insert the 6-Pin Main connector.
The BLUE, RED, YELLOW
and BLUE & RED LEDs will
alternatively illuminate.
Release the programming
button when the LED is RED.
Insert one functional key into
the ignition barrel.
DO NOT turn ON the key.
The RED LED will flash
rapidly 10x times.
Key bypass programmed.
Remove the key from
the Ignition barrel.
The module is now
programmed.
Use the remote of the remote
starter or security system to test
all of the supported features to
ensure proper programming.
Appuyez et maintenir
enfoncé le bouton de
programmation.
Insérez les connecteurs:
20 pins (Blanc),
6 pins (Rouge),
5 pins (Blanc),
2 pins (Blanc).
(Si requis)
Insérez le connecteur Principal
à 6-broches.
Les DELs BLEUE, ROUGE,
JAUNE et BLEUE & ROUGE
s'allumeront alternativement.
Relâchez le bouton de
programmation quand la DEL
est ROUGE.
Si le DEL n'est pas ROUGE
solide débranchez le
connecteur Principal à
6-broches et retournez au
début de l'étape 1.
Insérez la clé fonctionnelle
dans le barillet.
Ne tournez pas la clé.
La DEL ROUGE clignotera
10x fois rapidement.
Contournement de clé
programmé.
Si le DEL n'est pas ROUGE
solide débranchez le
connecteur Principal à
6-broches et retournez au
début de l'étape 1.
Retirez la clé du contact.
Le module est
programmé.
Testez toutes les fonctions
supportées sur le véhicule avec
la télécommande du démarreur
à distance ou du système de
sécurité.
3 / 5
Page

Publicité

loading