Publicité
StXX - Strobe selection (active for automatic and audio modes)
This mode forces the strobe effect on automatic and audio modes
Press the MENU key until STXX is displayed. Press ENTER.
The display shows "ST00" to "ST16". Select the desired strobe mode with the UP & DOWN keys. Press
ENTER to validate the selection.
"ST00" (no strobe) or "ST01" (slowest) and "ST16" (fastest).
When the strobe mode is validated, even after switching off and on again, the projector returns to its
last validated state.
SPXX - Selection of the scrolling speed of the automatic modes
The speed setting applies to automatic programs AU08 to AU10
Press the MENU button until SPXX is displayed. Press ENTER.
The display shows "SP00" up to "SP16". Select the desired speed with the UP & DOWN keys. Press ENTER
to validate the selection.
"SP00" (slowest) and "SP16" (fastest).
RXXX / GXXX / BXXX / WXXX - Manual Mode
Color-by-color intensity adjustment: R = Red - G = Green - B = Blue - W = White.
Press the MENU key until RXXX (or GXXX - BXXX - WXXX) is displayed.
Press ENTER. Select the color intensity with the UP & DOWN keys. Press ENTER to validate the value.
When the manual mode is validated, even after switching off and on again, the projector returns to its
last validated state.
Page 18
Publicité
