Publicité
Menu
Description
Addr
Set Address
Auxx /
Auto Mode
Soxx
Strobe setting for Auto & Sound
Stxx
modes
Snxx
Sound sensitivity setting
Speed Chase for Auto mode
SPxx
Au09 & Au10
Rxxx
Red color intensity adjustment
Gxxx
Green color intensity adjustment
Bxxx
Blue color intensity adjustment
Wxxx
White color intensity adjustment
Dxxx - Setting the DMX address
Press MENU to select DXXX, press Enter to start adjustment. Use the
UP or DOWN keys to set the desired address. Then press ENTER to confirm.
Auxx - SnXX - Selection of automatic or audio mode
Press the MENU button until AUXX OR SNXX is displayed. Press ENTER.
The display shows "AU01 to AU10" or "SN01 or SN02". Select the desired program (Au for automatic pro-
grams and Sn for audio programs) with the UP & DOWN keys. Press ENTER to validate the selection, then
set the desired scrolling speed between
"SP00" (slowest) and "SP99" (fastest) with the UP & DOWN keys, Press ENTER to validate the selection.
When the auto/sound mode is validated, even after switching off and on again, the projector returns to
its last validated state.
Sub-Menu
Description
Setting up a starting DMX address of
D001 - D512
the fixture
Au01
Red
Au02
Green
Au03
Blue
Au04
White
Au05
Yellow
Au06
Cyan
Au07
Purple
Au08
RGBW
Au09
Chase in Jump mode
Au10
Chase in Fade mode
So01
Sound mode 1
So02
Sound mode 2
St00
No strobe
St01-St16
Strobe from slow to fast
Sn00-Sn16
SP01-SP16
Speed Chase from slow to fast
R000-R255
G000-G255
B000-B255
W000-W255
Publicité
