Publicité
"di" for 2 times, and then the heating indicator light will go
out. The appliance turns back to the stand-by state.
• To cancel the boiling process, press the button
kettle will return to the stand-by state and the heating light
will go out.
Note: Only when the real water temperature is lower than the
adjusted degree, will the kettle start to boil after the button
has been pressed. If higher than the adjusted degree, the
kettle will automatically enter the stand-by state.
KEEP WARM FEATURE
There are two approaches to starting the keep warm function,
which keeps the boiled water warm at a temperature you
want.
A: To start keep-warm function in the heating process
• In the heating state, press the button
thereupon enters the heating and keep-warm process. At
this time, the desired water temperature to keep can be
adjusted by repeatedly pressing the button
it and temperature adds all the time. The body shell will
show the chosen degree and the keep warm light will flash
during adjustment.
• After completing setting for about 5 seconds, the body
shell shows the real water temperature and the boiling
begins.
20
, the
, the appliance
. Long press
Publicité
