Publicité
Sp 1-10
St 0-9
4 CH
6 CH
9 CH
48CH
52CH
Sh 1-56
Sp 1-10
St 0-9
Sou1~2
Sen1-9
Slave
r000-255
g000-255
b000-255
U000-255
St 0-9
CL01-CL41
St 0-9
dis
10s
20s
30s
60s
On
temP
50~65 °C
dir
--->
<---
InFr
on
oFF
Send
yes
Send
ver
VVxx
temp
XX C
Auto Speed 1-10 (slow->fast) (Speed)
(slow->fast) (Strobe)
A001-A509
A001-A507
A001-A504
A001-A465
A001-A461
Program Show 1-56
Program Speed 1-10 (slow->fast) (Speed)
Program Flash 0-9 (slow->fast) (Strobe)
2 Sound-activated, adjustable sensitivity
Slave
Red (0-100%)
Green (0-100%)
Blue (0-100%)
White (0-100%)
LED Strobe (slow->fast)
Static color
LED Strobe (slow->fast)
Set the backlight time of the display board, from 10 seconds to continuously on, and
the factory default is 10 seconds
Protection temperature setting, protection within the range of 50~65 °C, beyond
which the output power will be reduced
Set the light direction to the right
Set the light direction to the left
Remote control function setting on
Remote control function setting off
The one-button setting sending function sends the current light channel mode and
temperature protection value to other lights connected to this light. (No other
controller is allowed on the line)
Software version
The current light panel temperature (°C). If the temperature detection circuit
fails, the power-on prompt - RT -, and the menu displays error
Auto Mode，Run all effects randomly
Each channel mode is a separate
address. Connect in the console and
automatically enter the DMX mode
Publicité
