Ryobi RP4290 Manuel D'utilisation page 11

GB
FR DE ES
OPERATION
POSITIONING THE MOTION ALARM
See Figures 4 - 5
Positioning the motion alarm:
The motion alarm can be set on a flat surface, mounted with standard drywall
■
screws (not included), or attached to the mounting bracket with screws supplied
and secured using rope or webbing.
The device has a detection range of 110 degrees up to a distance of 30 feet. Follow
■
the procedures in Testing the detection range to make sure the area for which you
desire coverage is included in this range.
Testing the detection range:
The test mode allows you to judge the area that is being protected and adjust the
position of the device as needed to make sure the desired areas are covered.
To enter test mode: Press and hold the chime/alarm button and then press the # button.
The device will take approximately 30 seconds to scan the area, then the LED will
blink and a brief tone will sound for as long as the device detects motion. Walk around
the area where motion sensing is desired. Any time the LED turns solid and the sound
stops, you are out of the area where the device can detect motion.
To exit the test mode: Press and hold the chime/alarm button and then press the #
button.
NOTE: The test mode can only be initiated from the keypad.
IT NL PT DK SE FI NO RU PL CZ
English
ARMING/DISARMING THE DEVICE
See Figure 4
When arming the device, Alarm mode is the default selection.
To arm the device from the keypad:
Enter your personal security code.
■
Press the arm button.
■
Once armed, you have approximately 30 seconds to choose between chime or
■
alarm mode and leave the area.
To arm the device from the remote control:
Press the arm button.
■
Once armed, you have approximately 30 seconds to leave the area.
■
NOTE: You cannot choose between chime and alarm using the remote control. To
choose between chime and alarm, you must use the motion alarm's keypad.
To disarm the device from the keypad:
Enter your personal security code.
■
Press the DISARM button.
■
To disarm the device from the remote control:
Press the DISARM button.
■
6
HU RO LV LT EE HR SI SK GR TR