Publicité
All manuals and user guides at all-guides.com
Using in PC monitor mode
NOTE
– When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality VGA cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor.
The PIP function lets you display a
superimposed image to watch the TV channels
at the same time.
The PIP function only works if your PC has a digital
output.
You must first of all connect the computer and
adjust the resolution (see p.13).
Choosing PC mode
& Press the
key on the remote control to
AV
display the
.
Source List
é Use the cursor </> key to select
then press the cursor ≥ key to switch the TV
to PC mode (
).
DVI In
To return to TV mode, press the
and validate with ≥ key.
TV
Using PIP
While in PC mode you can call up a window
for TV channels.
Attention: the PIP feature is only available if a
computer is connected to the DVI In (see p. 13).
œ
& Press the
key to display the PIP screen.
The television image is reproduced in a small
superimposed window.
é Subsequent presses of the
the size of the window, switches to dual
screen and turns PIP off.
" Use the
keys to change the programmes
P –/+
of the PIP screen.
10
Using the PC menus
• Picture:
• Audio Selection: to choose the sound
and
PC
• Features:
key, select
AV
• Reset To Factory Setting: to return to the
œ
key changes
Press the
key to access the specific
MENU
settings of the PC monitor mode. Use the
cursor to adjust them (the settings are
automatically saved):
-
: to adjust the
Brightness / Contrast
brightness and contrast.
-
: to adjust the
Horizontal / Vertical*
horizontal and vertical placing of the image.
-
: to adjust the colours (cold,
Adjust Colour
normal or warm).
reproduced on the TV (PC or TV).
-
*: eliminates the horizontal
Phase/Clock
(
) and vertical (
Phase
Clock
-
: to choose between full screen or
Format
native format of the PC screens.
: to adjust the size and position of the
PIP
-
PIP screen.
-
: position is set automatically.
Auto Adjust*
factory settings (default settings).
*These adjustments are not available when a
computer is connected to the
) interfering lines.
.
DVI In
Publicité
