Publicité
Washer Connectionsfor WSKP2060.
Portable One-Faucet Connection
Use the hose connector provided with the
washer for a one fimcet connection.
To connect the washer:
mLfft fl_e hoses dUffle storage rack on the
back of fl_e washer.
mAttach the hose connector to d_e fimcet
adapter by pulling down on the locking
collar while lifting up on the connector
until it snaps into place.
m Make sure fl_e Temperature
selector is
set at COLD/COLD.
Locking Collar
To disconnect the washer:
m Unplug the electrical power cord and
put it back in its storage area.
m Tm-n the water fimcet off..
m Press the red Water Flow button to
release the wamr pressure.
Water
Flow Button
+
Hose Connector
m Slowly turn on the water f:aucet all the
way to d_e desired temperature
setting.
m Pull fl_e electrical power cord from the
back of fl_e washer. Plug fl_e power cord
into a 3-prong grounded
outlet.
t
Hose Connector
m Move the locking
collar down and pull
the hose connector
down to disengage
from the fmlcet adapter.
m Drain water from fl_e hoses through
the
hose connector.
m Hang
d_e hoses on the storage
rack.
4
Portable
Two-Faucet
Connections
Ifyou have two separate water connections,
your washer can be connected to both tlle
hot and cold water faucets. This kit can be
purchased from your dealer or from Parts
and Accessories. in the United States, call
800.626.2002./n
Canada,consult the yellow
pages for your local Camco number.
To connect the washer:
m Connect hot and cold water inlet hoses
to the hot and cold faucets.
m Secure the (kain hose to t|_e sink or
stand pipe.
m Plug tlle power cord into a 3-prong
,_'ounded outlet.
To disconnect the washer:
m Turn water fimcets off:
m Unplug power cord and remm it m t|_e
storage area.
m Disconnect the drain and water supply
hoses. Hang fl_em on the storage rack.
Publicité
