Publicité
CHARGING
1. Open the waterproof cap and connect the first end of the USC-C cable (included in
the box) to the X-COMMAND.
2. Connect the other end of the USB-C cable to a power source (e.g. a computer) or to
a charger (not included).
3. Plug the charger into a mains power socket.
You can track the charge level of the X-COMMAND via the X-COMMAND app.
To avoid prematurely flattening the device' s battery, we recommend that you follow the
battery charging instructions for each charging cycle. Ideally, you should charge your
battery before it drops below 20% and avoid charging it above 80%, rather than using
full charging cycles (0–100%).
In order to ensure that your device charges properly and to avoid damaging its battery,
use the USB-C/USB-C cable provided.
IMPORTANT
• securiteproduit@crosscall.com
• This device is not intended to be used by people (including children) with reduced
physical, sensory or mental capacities, or whose lack of experience or knowledge
prevents them from safely using the device, if they are not supervised or have not
been given instructions beforehand by the person responsible for their safety.
• Small parts present a choking hazard.
• Do not allow children or pets to chew or lick the device.
• Do not press on your eyes, ears or any part of the body with your device and do not
put it in your mouth.
• Avoid extreme temperatures. Do not expose the device to extreme temperatures
(-10°C/+60°C).
• Do not throw the product into a fire or other heat sources.
FR
EN
ES
DE
IT
PT
NL
HR
PL
SL
AR
SR
17
Publicité
