Publicité
Installation
Setup
It is necessary to fix the lift table to the floor for a fixed installation. To do this, use the existing holes in the floor
of the lift table. Make sure that the floor on which the lift table is installed and operated has sufficient load
capacity for the lift table and the maximum load. Also take into account the dynamic forces that can occur when
the load is raised and lowered.
maximum total load = net weight of the lift table + maximum lifting capacity
HIW / HTF-02 series
Figure 1 Fixing holes HIW
Figure 2 Fixing holes HTF
any kind of reproduction, even in parts, is not permitted.
UK
Page 11 of 22
Publicité
