Publicité
USE
When inserting the crankshaft setting tool (2) the
starter must be removed.
Never use this tool as a counter-holder when
loosening and tightening the crankshaft pulley.
Only use the flywheel locking tool (1) for this
purpose.
The camshaft setting tool (3) is inserted through
the bore in the camshaft gear and must engage
in the bore of the cylinder head.
NOTES
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicité
