Publicité
Troubleshooting
1
The light on the sensor is
flashing continuously
□
Turn on the water supply and activate the sensor.
If the sensor ashes 10 times continuously and
slowly, then replace the 4 "AA" batteries.
Flash 10 times
continuously
and slowly
-
J
Replace the batteries
2
The sensor is not activating
the water flow
□
If your water does not turn on by waving your
hand in front of the sensor.
□
Or if you are unable to turn your water off
by waving your hand in front of the sensor.
□
This indicates the sensor window may need
to be cleaned. If the sensor window is clean,
and still not functioning, this means the
control box will need to be replaced. Call
Glacier Bay customer service to request a
replacement control box. Replace the old
control box with the new control box.
14
H
Publicité
