Publicité
HOW TO USE THE VIBRATING MASSAGE BALL
• Press and hold the ON button to turn the massager ON; it will start at the lowest strength/
speed.
• Press the power button again to increase the strength/speed to level 2
• Press the power button again to enter the pulsating mode, the Vibrating Massage Ball will
pulsate at different strengths/speeds
• Press the power button again to increase to level 3, this is the maximum strength/speed
mode.
• Press the power button again to stop the massager and put it into standby mode.
• Press and hold the power button for three seconds to turn the massager completely OFF.
• After five minutes of non-use, the Vibrating Massage Ball will automatically power OFF
HOW TO MAINTAIN THE VIBRATING MASSAGE BALL
• To keep the Vibrating Massage Ball in pristine condition, wipe its surface with a slightly damp
towel and dry it with a soft cloth.
• Keep the Vibrating Massage Ball away from liquids and heat.
CHARGING INSTRUCTIONS
• The battery should be fully charged prior to use
• To charge the battery, plug in the Type-C cable into the charging port and the other end into
a USB power source.
• When the unit is charging, the battery indicator will flash throughout the charging process.
• When the battery is fully charged, the battery indicator will stop flashing and glow steadily.
• The average running time of the massager is 100-240 minutes depending on speed and
pressure levels.
Warning: if the vibrating massage ball massager is used incorrectly and/or carelessly it
can cause damage or injury.
IMPORTANT SAFEQUARDS
To reduce the risk of injury or electric shock:
• This massager is recommended for use by adults only.
• Do not use the massager directly on the surface of your skin. To avoid injury, the massaged
area should be covered by clothing or a dry towel.
• When using the massager, gently press and use it; do not massage the same part of the body
Publicité
