Publicité
Futura Installation Instructions
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned
on the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig.4)
Blade attachment
Twist the cover plate to access the blade mounting screw holes.
1.
Before installing the blades, remove the blade screws that are pre-installed on the fan motor
2.
assembly. Fig.5
Insert the blade into the slot of rotating member of fan motor assembly and align the 3 mounting
3.
holes on the blade to the 3 mounting holes on the rotating member of fan motor assembly and using
the 3 blade screws (removed in step 1) to secure the blade to the fan motor assembly, ensuring they
are tightened equally and evenly tighten. (Take care not to over tighten as this can damage blades).
Fig.6
Once completed, repeat the process on the remaining blades.
4.
Reinstall the cover via turning it clockwise. Fig.7
5.
Fig. 5
6 | P a g e
HANGING THE FAN
INSTALLING THE FAN
Fig. 6
Fig. 4
Fig. 7
Publicité
