Télécharger Imprimer la page

hjh OFFICE STAND PRO R 738140 Instructions De Montage page 25

Publicité

During operation
• Switch off the table base immediately if any unusual occurrences (noises, smoke, fumes, etc.) occur.
Have the table base repaired by a specialist company. Do not switch on the table base again until it
has been repaired.
• Switch off the table base immediately if the safety devices (e.g. up/down switch) do not function properly.
• When operating the sit/stand table, ensure that no objects or body parts can become trapped.
• When adjusting the table base, make sure that nobody is in the vicinity of the table base.
There is a risk of injury.
• Leave the vicinity of the table immediately if it begins to move unintentionally.
Do not operate the table base. Have the table base repaired by a specialist company.
Do not switch on the table base again until it has been repaired.
Cleaning
• Please unplug the mains cable from the socket before cleaning. Use a slightly damp cloth for cleaning
and wipe away any surface dust.
• Do not damage the connecting cable and keep the plug in a safe position.
• Dust the table base with a dry cloth once a week.
• Clean the table base with a damp cloth and mild detergent every 2 weeks
• Do not use corrosive or abrasive materials to clean this product.
Please dispose of cleaning solutions in an environmentally friendly manner.
Recycling and disposal
This product cannot be disposed of as household waste. This product should be recycled to avoid
environmental damage. Please use the appropriate recycling systems that are available to you.
Inside the control box there are electronic components, metal parts, plastic parts, wires and other parts.
They must be disposed of in accordance with the applicable laws and regulations.
They cannot be disposed of with household waste.
Care and maintenance
• Check all screw connections regularly and tighten them when necessary.
• The product may only be used if it is in perfect condition!
24
GB

Publicité

loading