Publicité
Installation
Unpacking
Carefully open the shipping carton and check for any damage to the device or the supplied accessories. Every Lab.gruppen product is tested and inspected before
leaving the factory and should arrive in perfect condition. If any damage is discovered, please notify the shipping company immediately. Only the consignee may
initiate a claim with the carrier or their insurers for damage incurred during shipping. Save the carton and packing materials for the carrier's inspection.
Included in the box
In addition to the PLM+ device, the shipping carton includes the following items:
• PLM+ Quick Start Guide (this Document)
• AC mains lead (power cable) with Neutrik® powerCON® connector (PLM 20K44, 12K44 and 8K44 only) and AC socket plug according to ordering selection.
PLM 5K44 uses a locking IEC connector.
• Rear brackets for additional rack support (pair) along with associated mounting hardware.
Please keep the original carton and associated packaging to facilitate shipping of the device should the need arise.
Mounting
addition, allowance must be made for cable or loom bends within a rack.
Rear Mounting
Two rear support brackets, along with associated mounting hardware, are included with the PLM+ device. It is strongly recommended that these are used wherever
the proper orientation depends on the rack depth and position of the rear rack rails.
15
Quick Start Guide
Publicité
