Publicité
Installation
1
Removing the mounting plate
Unlock the set screws (II) from the lamp body (A), and
remove the glass shade (B).
Unlock the mounting screws (DD) and washers (HH) from the
lamp body (A), and remove the mounting plate (BB) from the
lamp body (A).
BB
DD
HH
II
B
A
2
Installing the mounting plate
WARNING: Turn the power off at the main fuse box before
installation.
Temporarily secure the mounting plate (BB) to the outlet box
(not included) with the two outlet box screws (CC), then mark
the anchor (GG) locations on the wall through the slots.
Remove the mounting plate (BB) and drill holes making them
slightly smaller than the anchors (GG) provided. Insert the
anchors (GG) and tap into the wall until secure.
Install the mounting plate (BB) to the outlet box with two outlet
box screws (CC), thread the anchor screws (FF) provided into
the anchors (GG).
5
Please contact 1-877-527-0313 for further assistance.
BB
GG
HOMEDEPOT.CA
FF
CC
Publicité
