Publicité
Power Requirements
The cabinet is intended for connection to an alternating current. The connection voltage
(V) and frequency (Hz) are shown on the nameplate in the cabinet. The power
connection is made using a three-pin plug to a wall socket. Any requirement for earthing
from thelocal power supply must be met.Thecabinet plug and wall socket should then
give a correct earthing. If you are in doubt, contact your local supplier or authorized electrician.
Warning - This appliance must be earthed
The flexible cord fitted to this appliance has three cores for use with a 3-pin 13 Amp plug. If a B.B.
1363 (13 Amp) fused plug is used, it should befitted with a 13 Ampfuse or amoulded right-angled
Schuko plug. Note the plate with a hole in it between and above the two pins - this connects to
French and Belgian sockets, which have an earth pin that sticks out. Running in aslotcoming from
thatplate isacontinuationstripfrom theplate.Other Europeancountries usea socketwithascrolled
metal connector emerging from the side which mates with that strip. This ensures that the Schuko
can be used in most mainland European countries.
Important
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow: earth
Blue: neutral
Brown: live
Thecolours of the wires in the mains lead of this appliance might not correspond with thecoloured
markings identifying the terminals in your plug. Proceed as follows:
Thewire which is coloured green-and-yellowmustbeconnected totheterminal inthe plug which is
marked "E", marked by the earth symbol or coloured green-and-yellow. The wire, which is coloured blue,
must be connected to the terminal, which is marked with the letter "N", or coloured black. the wire
which is coloured brown must be connected to the terminal which is marked withthe letter "L" or
coloured red.
Starting Up
Main switch（optional） Lock
Plug in the cabinet.
The display shows the actual cabinet temperature
Servicing
Make sure the appliance is switched off at the mains before service is performed on
electrical parts.
GB
Thermostat Display
8
P2M031STD -Ver.1.0
Publicité
