Publicité
STEERING WHEEL BATTERY INSTALLATION AND
REPLACEMENT DIAGRAM
1. The steering wheel battery cover is set at the bottom of the steering
wheel.
2. Unscrew the screw with a screwdriver and take out the battery box
cover.
3. Insert 2 AA batteries (1.5V) correctly according to the positive and
negative poles in the battery box.
4. Install the battery cover and tighten the screws to complete the
installation.
5. Follow the steps 2 and 3 above to remove the battery.
1. Children must under adult Supervision when install batteries.
2. Keep assembly tools out of sight and reach of children.
3. Leaking AA batteries are longer functional and have to throw to the
disposable bins properly.
4. Do not mix different battery bands within the device, different types of
batteries or new and used batteries are not to be mixed.
5. Requires 1.5V AA batteries.
6. Non rechargeable batteries can not to be charged.
7. Rechargeable batteries are only to be charged under adult
supervision.
8. Rechargeable batteries must be removed from the product before
being charged.
9. Install batteries with polarity are shown inside the battery
compartment. Batteries are to be inserted with the correct polarity (+
and –).
10. Remove batteries in charger if necessary.
11. Power supply should remain loading to the battery compartment.
12. Do not mix old and new batteries.
13. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-
cadmium) batteries.
14. The supply terminals are not to be short-circuited.
15. Exhausted batteries are to be removed from the toy.
Battery cover
BATTERY INSTRUCTIONS
Battery cover
Battery cover
Publicité
