Publicité
DIRECT WIRE METHOD
Electrical Shock Hazard
Electrically ground dishwasher. Connect ground wire to
result in death, fire, or electrical shock.
1. Install strain relief and route direct wire so that it does not
touch dishwasher motor or lower part of dishwasher tub. Pull
Select the proper size twist-on connectors to connect your
Insert wire ends into twist-on connector. Do not pre-twist
bare wire. Twist connector. Gently tug on wires to be
2. Connect the wire "B" as follows using twist-on
connectors "C" sized to connect direct wire to
16-gauge dishwasher wire:
From bare ground wire "D" into a U-shaped hook.
Wrap ground wire hook clock- wise around ground
connector "E" and under the washer "F". Securely
tighten ground connector "E" and under the washer
"F". Securely tighten ground connector "E". Do not untie knot in the wires.
3. Tighten clamp connector or conduit connector screws "G".
WARNING
HELPFUL TIP:
household wiring to 16-gauge dishwasher wiring.
sure both are secured.
Black
English
A
G
20
Publicité
