Publicité
If power is cut or the air fryer is unplugged during operation, the air fryer will be
off.
When power is resumed or the air fryer is plugged in again, operation will
resume.
STOP COOKING:
To end cooking, press and hold the POWER BUTTON
COOKING END:
When the air fryer reaches the end of its cooking time, OFF will be shown on
the screen and an audible timer alert will sound.
The fan will continue to operate for close to 30 seconds until the internal
central temperature drops.
The air fryer will then enter standby mode.
Instruction :
1. Insert power cable into the earthed power socket;
2. Operate the control panel to set the required temperature (45~200℃）
3. Set the Timer to 3 minutes for preheating.
4. The time required to operate the control panel setup
5.
When the selected menu indicator off, carefully pull the fry drawer out from
the appliance, place the food material inside the fry basket (Attention: do not
exceed the maximum line); Put the fry drawer back the product;
(Note:
For better cooking result, turn over the ingredients by shaking the
basket in the middle of cooking process.)
Care and Maintenance
1. Please unplug the power cord and let it cool before cleaning products.
2.
Fryer drawer and basket and surface of fryer available detergent and
sponge cleaning, do not use a hard wire cleaning to avoid damage to the
surface.
3. Used wet towel to wipe the surface of the fryer, do not use corrosive liquids
for cleaning. And clean it in time after you finish cook.
for 2 seconds.
Publicité
