Publicité
AUDIBLE SIGNALS
DURING OVEN SETTINGS
SETTING THE CLOCK
0/Clock are combined in one button. The clock
1.
is 12-hour system. Press and hold the button for
3 seconds to enter the clock setting mode, then
press the 0-9 number pad to enter clock setting,
press Start/+30s pad to confirm the setting.
You can check the clock time while cooking is in
progress by touching the Clock pad.
Express Cooking
Use the Express-One Touch buttons (1 – 6) for quick
start pre-timed cooking.
Number
Cook Time
pad
1
1 Minute
2
2 Minutes
3
3 Minutes
4
4 Minutes
5
5 Minutes
6
6 Minutes
Add 30 Seconds
Touch this button for quick 30 second cook time.
Pressing this button during a set cook cycle will add
30 seconds to the current time.
Every time the button is pressed an additional 30
seconds will be added to the current cook time.
NOTE:
During the Express cook,, Tme Cook and Time
Defrost, you can add 30 seconds each time the
button is pressed.
HOW TO SET THE OVEN CONTROLS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try
again.
SETTING A COOKING PROGRAM
SETTING THE KITCHEN TIMER
Press Timer button to enter the mode.
1.
Enter the amount of time by touching the
2.
number pads. Digit time is in minutes and
seconds and set left to right. Set one digit (a 5
for 5 seconds) or up to four digits (2405 for 24
minutes, 5 seconds).
Press Start/+30s button to confirm the setting.
3.
NOTE: Time countdown can be seen in display for
5 seconds before clock or cooking time is returned
to display.
Press Timer and then press Stop to cancel
Timer during timing process.
A. One-stage Cooking
Touch Time Cook pad.
1.
Use the number pads to set a cooking time. You
can set a cooking time from one second to 99 minutes
and 99 seconds.
2.
If you want to set a power level other than 100%
power, touch POWER, then use the number pads to
enter the power level. You can set the power level
following the indicator.
There are 10 power level to be selected.
B. Multi-stage Cooking
You can program oven for 2 cooking stages. Each stage
can be programmed with a different power level and time.
To program 2-stage, press the Time Cook button, select
the desired time and press the Power Level button to
select the desired power, then press the Time Cook
button to set the 2
nd
stage cook time and power.
Press Start to begin the cook program.
The oven will automatically proceed to the end of cooking
stages.
NOTE: After stage 1 time has elapsed, one beep sound,
signaling the beginning of stage 2. After total time has
elapsed, 4 beeps sound and END appears in display. Touch
Stop pad or open oven door to clear END before starting
another cooking function.
11
Publicité
