Home Decorators Collection GILES Serie Guide D'utilisation Et D'entretien page 9

Operation
On the top-right of the electric firebox is the touchscreen control panel. This panel contains the buttons to properly operate the electric
fireplace. The buttons on the remote control function in the same way. The remote control has an effective range of up to 6 m.
NOTE: The remote control is intended only for the functional
operation of the product. It cannot lock/unlock the heating function.
POWER
The POWER button turns the appliance on or off. It has a memory function; the button turns off all functions at once but retains the settings
in the memory. By pressing the button again, the unit will turn on at the same settings. If the TIMER has set and time has expired, all
functions will stop. Press the POWER button to start the appliance.
FLAME
The FLAME control switch manages the flame brightness. There are four brightness levels and an off position. Each time the FLAME button
is pressed, the intensity of the flame decreases. When adjusting the FLAME button, a number indicating the brightness of flame will be
visible on the digital display. After turning on digital display, if nothing happens within 10 seconds, digital display will turn off.
HEATER
The HEATER button turns the heater on and off. When in ON position, press and hold the HEATER button for 5 seconds and enter
temperature adjustment mode (Note: This cannot be set with the remote control). In the adjustment mode, the digital display will flash at
0.5 second intervals.
There are 11 temperature settings:
ON - 64˚F - 66˚F - 68˚F - 70˚F - 72˚F - 74˚F - 76˚F - 78˚F - 80˚F - 82˚F
(ON - 18˚C - 19˚C - 20˚C - 21˚C - 22˚C - 23˚C - 24˚C - 25˚C - 26˚C - 27˚C).
After the temperature is selected the digital display will flash 5 times and exit from setting status. After turning on the digital temperature
display, if nothing happens within 10 seconds, the digital display will expire. When turn off the heat, the quartz tubes will stop working first,
then the blower after 60 seconds.
TEMPERATURE UNIT CONVERT FUNCTION
With the heater in the ON position, press and hold the power icon for 5 seconds. Current temperature unit display will flash 3 times and
convert to another temperature unit (Note: This cannot be set with the remote control).
LOCK & UNLOCK HEATER FUNCTION
Press and hold the heater icon for 10 seconds. The ember bed will flash 6 times, indicating that the heater function is locked. To unlock the
heater function, just repress and hold the heater icon for 10 seconds again, then the ember bed will also flash 6 times indicating the heater
function is unlocked and to recover the original states which you have set (Note: This cannot be set with the remote control).
9
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS