Publicité
Connection Diagram
Before initial setup, follow the steps below to connect your camera.
1. Connect the camera to a PoE injector with an Ethernet cable.
2. Use the power adapter to power on the PoE injector and connect it to your router.
PoE IP Camera
Router
NOTE: You can power the camera with a PoE switch, PoE injector, Reolink
PoE NVR or a DC 12V power adapter(not included in the package).
5
English
Ethernet Cable
Power Adapter
PoE Injector*
Set up the Camera
Download and launch the Reolink App or Client software, and follow the onscreen
instructions to finish initial setup.
• On Smartphone
Scan to download the Reolink App.
• On PC
Download path of the Reolink Client: Go to > Support > App & Client.NOTE:
• If you are connecting the PoE camera to a Reolink PoE NVR, please set up the camera via
the NVR
interface.
English
6
Publicité
