Publicité
Stripping and cutting tool
Handy tool for quick and clean stripping of network cables. The blades in the middle part
are suitable for flat cables and as a cutting tool. Suitable for network cables, speaker
cables for cable diameters from 3.2mm to 9.5mm. The blade height is infinitely
adjustable with an adjusting screw on the front.
Cable tester network - LAN tester
The network tester has two test modes. Master unit with RJ11 and RJ45 socket. Remote
unit with RJ11 and RJ45 socket.
Sweep mode:
Each data line is individually tested on the master unit
a signal is sent on the first pin, the LED for pin 1 lights up
Master unit and remote unit green etc.
Slow Sweep Mode:
This variant checks slower than the first.
This ensures that the cable with plugs is continuous and that the assignment is correct.
All 8 or 6 data lines as well as mass (ground) are checked
9V block battery is not included.
19.09.2023
16
www.deleycon.com | info@deleycon.com | www.memoryking.de | info@memoryking.de | +4933773920
Publicité
