Publicité
[UK]
Accessories TWS earbuds x 1 Charging cable x 1 User manual x 1
Usage
Turn on:
Just take the two earbuds out of the charging cradle. They will turn on
automatically. Once the earbuds have powered up, you should hear a
sound indicating that they have automatically connected with one
another.
Turn off:
There are two ways to turn off the earbuds. Once the earbuds have
powered down, you will hear a sound indicating that they are off. The
RED indicating light will flash three times quickly.
Method 1: Put the earbuds into the charging cradle. The earbuds will
turn off and go into charging mode automatically.
Method 2: You can press and hold the control buttons on the earbuds
for three seconds to turn them off.
Note: If you turn off only one of the earbuds, the other one will remain
connected with the mobile device and carry on working.
Earbud Pairing
The earbuds will pair with one another automatically when they are
turned on. One of the earbuds will become the master earbud.
The master earbud's LED indicating light will flash RED and BLUE
alternately. The other earbud will not display a light.
Bluetooth Connection with Mobile Device
While the earbuds are paired with one another, open the Bluetooth
settings on your mobile phone, iPad or other Bluetooth-enabled
TWS 19151
device, search '
" and click on it to connect. When the
earbuds connect with your device successfully via Bluetooth, you will
hear 'CONNECTED' and the LED indicating lights on the earbuds will
turn off. You can then play music on your device and enjoy it through
the earbuds.
Publicité
