Publicité
Assembly Instructions
Confirm Table Compatibility
Before beginning installation, confirm that
your table is compatible with NeatUp 2.
NeatUp 2 has a minimum height of
18.9"/48cm and a maximum height of
51.2"/130cm. If your table exceeds either
of these it must be electronically limited to
prevent damage to the NeatUp 2.
The upper mounting socket on NeatUp
can be placed in 3 different positions
and the mounting stem can rotate 360°.
Before installing, check to make sure it
can be positioned in a way that it can be
screwed into the worksurface without
interference from structural brackets.
NOTE: As Neatup is raised and lowered, a light
dust may appear on the sides of the column.
This can be wiped away with a soft cloth and
does not affect the performance of the product.
Attach Foot
1
If needed, raise table height so there is at least
20"/51cm between the table foot and the bottom
of the worksurface
2
Clean the surface of the table foot with the
included alcohol wipe and let dry
18.9"/48cm
MIN
①
51.2"/130cm
MAX
②
③
3
Publicité
