Sommaire des Matières pour Humanscale NeatUp 2.0
- Page 1 Assembly Instructions North America: +1 800 400 0625 Europe: +353 (0)1 858 0910 Asia Pacific: +8522581 0570...
- Page 2 Parts Included ① NeatUp 2 NeatUp 2 (Power Version) (Data Version) ② ③ Upper Mounting Lower Mounting Screws Screws Tools Needed ④ ⑤ Drill with Philips Pencil Head Driver Bit...
- Page 3 Assembly Instructions Confirm Table Compatibility ① Before beginning installation, confirm that your table is compatible with NeatUp 2. 51.2”/130cm NeatUp 2 has a minimum height of 18.9”/48cm and a maximum height of 51.2”/130cm. If your table exceeds either 18.9”/48cm of these it must be electronically limited to prevent damage to the NeatUp 2.
- Page 4 Peel away the film from the adhesive pad on the ① bottom of NeatUp 2. Align the NeatUp 2 with the table leg and firmly press down to bond adhesive ② NOTE: Adhesive requires 24 hours to achieve full bonding strength ③...
- Page 5 Attach Top Raise upper column of NeatUp 2 to the bottom of the worksurface Position the mounting stem to avoid metal brackets. For best performance it should be as close to ① centered above the NeatUp column as possible. Mark the position of the mounting stem on the worksurface.
- Page 6 Raise the upper NeatUp column until the mounting socket engages with the mounting stem and clicks into place. ① Removing NeatUp Push the release button on the upper mounting socket to unhook NeatUp from the mounting stem. ② Pull the bottom of NeatUp away from the table leg to ③...
- Page 7 Alignez le NeatUp 2 avec la patte de table et Instructions de appuyez fermement dessus pour coller l’adhésif. montage (français) Voir page 4, ② REMARQUE : Il faut compter 24 heures pour Pièces incluses que l’adhésif colle pleinement. Assemblage du rail (vue arrière) Pour sécuriser davantage le NeatUp, retirez la ① NeatUp 2 (version de puissance) ou NeatUp 2 colonne de la plaque de montage adhésive en la glissant à...
- Page 8 For our terms and conditions please go to https://www.humanscale.com/about/legal-information/terms-conditions.cfm © 2023 Humanscale Corporation. The text and artwork are copyrighted materials. All rights reserved. The Humanscale mark and logo are trademarks of Humanscale Corporation and are registered in the United States and certain other countries.