Logitech ZONE VIBE WIRELESS Guide De Configuration page 8

HEADPHONES LIGHT INDICATOR
White
Connectivity
Red
Note:
- User-triggered behaviors, such as Bluetooth
the behavior is completed
CHARGING
To conserve battery life, headphones
automatically power off after 30 minutes
without usage
Sleep timer can be adjusted in Logi Tune
The headphones LED light will turn RED slow
blinking when the battery is lower than 10%
Charging via USB cable
1 Plug one end of the cable to the USB-C port
on the bottom of the earcup and the other
end into the USB-C charging port on
your computer
2 The LED light will start breathing white when
charging
3 The LED light will turn solid white when
fully charged
– 2 hours will fully charge the battery
– 5 minutes will give you 1 hour of playback
Note:
Battery life may vary based on user, environment,
and computing conditions
4 You can use the headphones while charging
Category
Power Battery charging
Battery fully charged
Bluetooth
Bluetooth
Active call
Calls
Incoming call
Calls
Power Low battery (< 10%)
Factory reset
pairing, will be prioritized then revert back to its previous status once
®
Status
Power ON Turn solid white and then dim
pairing
®
Turn solid white and then dim
®
Mute
Fast blink from red to white for
three times then LED turn off
Light
Breathing
Solid and then off
Fast blinking
Solid
Slow blinking
Solid
Slow blinking
8 English