Publicité
EN
Safety Instructions
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your Buffalo product.
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT immerse in water.
• DO NOT clean with a water jet or steam cleaner.
• Caution, hot surface! DO NOT touch when in use.
• Always keep an eye on the appliance when in use.
• DO NOT obstruct or cover the appliance in any way when in
use.
• DO NOT move or carry the appliance when it is switched on.
• Do NOT allow the power cord to come into contact with the
hot surface of the appliance.
• Ensure the surface is smooth, clean and dry before use.
• Always switch off and disconnect the power supply to the
appliance when not in use and before cleaning.
• Intended for commercial use only.
• Keep the appliance and its plug away from water and any
other liquids. In the unlikely event that the appliance should
fall into water, immediately pull the plug out of the socket and
have the appliance checked by a certified technician.
2
HZ508-HZ509_ML_A5_v1_20240924.indb 2
HZ508-HZ509_ML_A5_v1_20240924.indb 2
2024/9/24 10:29:58
2024/9/24 10:29:58
Publicité
